Vendor: HobbyWing
Type: Cooling Fan
Price: 11.99

Cooling Fan Overview:

HobbywingG2S Elite 2510BH-6V Cyclone Cooling Fan. This replacement cooling fan is intended for the Hobbywing Max10 80A and XR10 PRO G2S Stealth ESCs (Electronic Speed Controller). Package includes one cooling fan.

NOTE: Please choose the correct cooling fans for different applications.

• For 4-6 cell NiMH or 2S LiPo: No need to change the 5V cooling fan on the ESC
• For 7-9 cell NiMH or 3S LiPo: Please choose a 12V cooling fan or supply the 5V fan from the receiver (+6V)
• For 10-12 cell NiMH or 4S LiPo: Please choose a 12V cooling fan, and cut the output of the built-in BEC. Then supply the receiver with a UBEC (An additional external DC-DC regulator)

Vendor: HobbyWing
Type: ESC & Motors Combo
Price: 79.99

Hobbywing QuicRun Fusion SE FOC 2-in-1 540 Spec Crawler Brushless ESC and Motor System. This innovative 2-in-1 system utilizes a compact integrated ESC giving you one of the most compact and easy to setup motor/ESC systems. Featured FOC technology provides incredible low speed control and the smooth startup needed for rock crawling. This system also uses an IP67 waterproof rating giving you the confidence to tackle any trail condition. Additionally there are several programming options built into the ESC giving you the ability to tailor the driving experience to your preferences. Packed with technology specific for scale trucks and rock crawlers the QuicRun Fusion SE FOC 2-in-1 540 Spec is an excellent addition to your next build.

Features:

Vendor: HobbyWing
Type: Surface ESC
Price: 126.99

Hobbywing Xerun XR10 Stock Spec G2 1/10 Sensored Brushless ESC. Designed specially for 1/10 Touring Car and Buggy Stock Class Racing and 1/10 Drift cars, this Xerun XR10 Stock Spec G2 is loaded with updates and improvements to provide racers and drifters with the ultimate performance and reliability to achieve their full potential!

Features increased maximum current rating by 20 amps, significantly lower temps under the same load, a smaller footprint with a 14.3% Lower center of gravity design, adjustable multi-level throttle and brake curve, upgraded from 3A to 5A adjustable 6-7.4V built-in BEC and independently adjustable drag brake frequency! In addition, the Xerun XR10 Stock Spec G2 is equipped with Dual firmware blinky/stock and non-blinky/boost modes to suit different competition requirements! In terms of Data logging, this XR10 Stock Spec G2 is capable of recording the maximum ESC/motor temperature, motor RPM, and others all in real-time! Get the Xerun XR10 Stock Spec G2 ESC to maximize the performance and reliability of your kit!

Features:

• Increased maximum current rating by 20 amps
• Significantly lower temps under the same load
• Small footprint with 14.3% Lower center of gravity design
• Independently adjustable drag brake frequency
• Adjustable multi-level throttle and brake curve
• Dual firmware blinky/stock and non-blinky/boost to suit different competition requirements
• Variable frequency regulation of PWM & brake frequencies
• Built-in polarity protection
• Data logging for recording the maximum ESC/motor temperature, motor RPM, and others in real time
• Upgraded from 3A to 5A adjustable 6-7.4V built-in BEC

Specifications:

• Type: Sensored Brushless
• Applications: 1/10 TC and Buggy Stock Class Racing and 1/10 Drift cars
• Cont./Peak Current: 100A/500A
• Input Voltage: 2S LiPo (Only)
• BEC Output: (6-7.4V) 5A Adjustable
• Motor Limit: (>10.5T) With 2S LiPo
• Dimensions: 34.8x30x13.8mm
• Weight: 63g

Includes:

• (1) Xerun XR10 Stock Spec G2 Sensored Brushless ESC
• (1) Cooling Fan
• Heat Shrink Tubes, zip-ties and double-sided tape
• Manual

Vendor: HobbyWing
Type: Surface ESC & Motor Combo
Price: 112.99

Get ready to take your racing game to the next level with the Hobbywing XR10 Justock G3SS ESC w/ SD G2.1 Motor Combo! Designed specifically for spec class racing, this combo features fixed 0° timing and an included SD G2.1 motor that is perfect for both 1/10 and 1/12 on and off-road racing. Whether you're a beginner or an expert, this powerful duo is sure to enhance your performance on the track.

Note: This product photo may not fully depict the described item. For comprehensive details on the listed product, please refer to the specifications provided.

Features:

• ESC:
• Built-in polarity protection. The XR10 Justock has integrated MOSFET's that if the battery terminals are connected in reverse, the MOSFET will be reverse-biased and will not allow current to flow through the system
• Programmable via OTA Wireless module or 3in1 program box
• Built-in capacitor module eliminates the need for external capacitors and unwanted space
• RPM speed limit function supports up to 6 different speed, RPM, selections to meet the needs and demands of various competitions in the world (Set through OTA module or 3in1 box)
• Internal ESC timing has been set to 0 degrees and cannot be adjusted for stock racing
• Built-in BEC can support a maximum output current of up to 8A. Output voltage can be set between 6V or 7.4V
• Calibration or performing a factory-reset can be achieved by using this SET button. Simple and easy to use
• Supports both CCW (counterclockwise) and CW (clockwise) motor directions
• Protection functions include: reverse polarity, battery voltage, ESC temperature, motor temperature, signal lost and locked rotor protection
• ESC includes the Freewheeling setting allowing for lower ESC temps enhancing drivability through corners
• Built-in data logging for post-run reports
• Motor:
• Use of a heat-resistant magnet attached aluminum case and double insulated windings, high precision bearings, and rotor with a strong structure guarantees outstanding performance and super durability
• Built-in Hall sensor non-adjustable end bell combined with a high precision and balanced rotor guarantees the user a smooth and linear power on demand
• Silicon O-ring seal fitted between the end bell and stator helps to conduct inner heat to the motor case and prevent dust from entering the HALL sensor
• Detachable structure design for daily cleaning and maintenance can effectively prolong the service life of this Justock motor and improve its operating efficiency
• This Justock motor is applicable to various 1/10th, 1/12th on-road & off-road vehicles. It can be an ideal choice for Stock or Sport class races but can also be a nice choice for newbies for practice
• The motor design is in compliance with IFMAR, and ROAR specifications

Specifications:

• ESC:
• Continuous Current: 60A
• Burst Current: 380A
• Battery: 2S Lipo (Only 2S)
• Built-in BEC: 6V/7.4V @ 4A(Switch-mode)
• ESC programming: Independent programming port
• Motor Supported: Sensor and sensorless brushless motor
• Motor Limit: 10.5T, or greater,3650 Motor
• Application: 1/10, 1/12 On-road and Off-road
• Cooling Fan: Powered by BEC
• Size: 40.9x33.9x32.1mm (LxWxH)
• Weight: 75.4g (Including weight of wire)
• ROAR Approval: Yes
• Motor:
• Scale: 1/10, 1/12
• Brushless: Yes
• Sensored: Yes
• Pole Count: 2
• KV Rating: 4000kV
• LiPo Cells: 2-3S
• No-Load Current(A): 4.9A
• Outer Diameter: 35.9mm (1.413")
• Length: 52.5mm (2.067")
• Shaft Diameter: 3.17mm (0.125")
• Weight: 175g (6.17oz)
• Timing: Fixed

Includes:

• (1) Justock G3SS ESC
• (1) Justock 10.5T G2.1 brushless motor
• (1) 5V cooling fan
• (1) Sensor cable

Vendor: HobbyWing
Type: Surface ESC
Price: 49.99

Experience the ultimate performance, durability, and reliability with the Hobbywing QuicRun 10BL120 G2 120A 1/10 Sensored Brushless ESC. Perfect for 1/10 TC, Buggy, and Drift cars, this high-performance ESC is budget-friendly and packed with updates and improvements to elevate your driving experience.

Features a built-in polarity, overheat, throttle loss and overload protection, dual high capacity capacitors, up to 32 degrees adjustable Boost and Turbo timing, an adjustable CW/CCW motor rotation function and an upgraded from 3A to 5A switchable 6-7.4V built-in BEC! In addition, the QuicRun 10BL120 G2 120A can operate with sensored or Sensorless motors and is equipped with an aluminum heat sink to maximize heat dissipation and prevent the ESC from overheating! This updated QuicRun 10BL120 G2 120A ESC is the ultimate upgrade for your 1/10 TC, Buggy and Drift cars!

NOTE:

• This ESC is NOT designed for a racing applications.
• Boost & Turbo timing cannot be used with 3S LiPo batteries to prevent damage to the ESC.

Features:

• High performance at a budget price
• The perfect ESC for 1/10 TC, Buggy and Drift applications
• Built-in polarity, overheat, throttle loss and overload protection
• Up to 32 degrees adjustable Boost and Turbo timing
• Adjustable CW/CCW motor rotation
• Upgraded from 3A to 5A adjustable 6-7.4V built-in BEC
• Dual high capacity capacitors
• Can operate with sensored or Sensorless motors
• Aluminum heat sink to maximize heat dissipation
• Programmable with LCD box, LED box (purchase separately) and SET key

Specifications:

• Type: Sensored Brushless
• Applications: 1/10 TC, Buggy and Drift cars
• Cont./Peak Current: 20A-760A
• Input Voltage: 2-3S LiPo
• BEC Output: (6-7.4V) 4A Adjustable
• Motor Limit: 2S LiPo >4.5T / 3S LiPo >10.5T Motor
• Dimensions(LxWxH): 44x36.8x32.3mm
• Weight: 101.5g

Includes:

• (1) QuicRun 10BL120 G2 120A 1/10 Sensored Brushless ESC
• (1) Cooling Fan
• Heat Shrink Tubes, zip-ties and double-sided tape
• Manual

Vendor: HobbyWing
Type: Surface ESC
Price: 62.99

The Xerun XR10 Justock G3S 1/10 Sensored Brushless ESC is a versatile and reliable electronic speed controller designed for competitive RC racing. It features built-in polarity protection to prevent damage from reverse battery connections, ensuring system safety. With programmability options via OTA Wireless module or 3in1 program box, users can easily customize settings to suit their racing preferences. Additionally, its RPM speed limit function offers flexibility with up to 6 different speed selections, catering to various competition requirements worldwide. The ESC also incorporates a built-in capacitor module, eliminating the need for external capacitors and saving space.

Features:

• Built-in polarity protection. The XR10 Justock has integrated MOSFET's that if the battery terminals are connected in reverse, the MOSFET will be reverse-biased and will not allow current to flow through the system
• Programmable via OTA Wireless module or 3in1 program box
• Built-in capacitor module eliminates the need for external capacitors and unwanted space
• RPM speed limit function supports up to 6 different speed, RPM, selections to meet the needs and demands of various competitions in the world (Set through OTA module or 3in1 box)
• Internal ESC timing has been set to 0 degrees and cannot be adjusted for stock racing
• Built-in BEC can support a maximum output current of up to 8A. Output voltage can be set between 6V or 7.4V
• Calibration or performing a factory-reset can be achieved by using this SET button. Simple and easy to use
• Supports both CCW (counterclockwise) and CW (clockwise) motor directions
• Protection functions include: reverse polarity, battery voltage, ESC temperature, motor temperature, signal lost and locked rotor protection
• ESC includes the Freewheeling setting allowing for lower ESC temps enhancing drivability through corners
• Built-in data logging for post-run reports

Specifications:

• Continuous Current: 60A
• Burst Current: 380A
• Battery: 2S Lipo (Only 2S)
• Built-in BEC: 6V/7.4V @ 4A(Switch-mode)
• ESC programming: Independent programming port
• Motor Supported: Sensor and sensorless brushless motor
• Motor Limit: 10.5T, or greater,3650 Motor
• Application: 1/10, 1/12 On-road and Off-road
• Cooling Fan: Powered by BEC
• Size: 40.9x33.9x32.1mm (LxWxH)
• Weight: 75.4g (Including weight of wire)
• ROAR Approval: Yes

Includes:

• (1) Justock G3SS ESC
• (1) 5V cooling fan

Vendor: HobbyWing
Type: Surface Motor
Price: 349.99

Hobbywing EZRun 70125SD 1/5 Scale Sensored Brushless Motor. 

Vendor: HobbyWing
Type: Surface ESC & Motor Combo
Price: 129.99

The Quicrun WP 8BL150 G2 ESC provides excellent waterproof and dustproof performance for use in various climatic conditions and harsh environments. The smart freewheeling technology increases efficiency and reduces operating temperature, while the powerful switch mode BEC and multiple protection functions ensure a safe and reliable drive. Use the independent programming port to easily adjust settings without having to disconnect the throttle cable.

The Hobbywing QuicRun WP-8BL150 G2 ESC is Designed to electrify your experience so you can take on the most demanding conditions, this waterproof brushless combo is perfect for any entry level race buggy or bashing applications. The advanced G2 technology ensures seamless integration between the ESC and motor, delivering a powerful and efficient performance. With rugged durability and cutting-edge features, the QuicRun WP-8BL150 G2 is your gateway to an exhilarating experience that's ready to conquer any terrain.

Experience a new level of performance with the QuicRun 1/8 SL G2 Motor from Hobbywing. Designed for 1/8 scale vehicles, this motor boasts impressive power and efficiency, making it a must-have for any entry level race buggy or bashing application. The high-quality construction ensures durability and reliability, while the precise engineering guarantees smooth and consistent operation.

ESC Features:

• Extreme performance
  
• Powerful built-in BEC
  
• Efficient cooling system
  
• Capacitor Thermal Protection
  
• Built-in capacitor
  
• IP-67 waterproof Rating
  

Motor Features:

• 4-pole rotor design for more torque with strong explosive force
  
• sensorless interface
  
• Precision CNC shell
  

ESC Specifications:

• 150A/950A Sensorless, Sensored Brushless Motor for 1/8 RC.
• Works with 3-6s Lipo.
• BEC Output of 6V/7.4V adjustable, continuous current 6A (switch mode).
• Cooling fan powered by built in BEC.
• Programming port shared with fan port.
• Motor Limit with 4S Lipo: 3000 KV.
• Motor Limit with 6S Lipo: 2400 KV (4274 size motor).

• 150A/950A Sensorless, Sensored Brushless Motor for 1/8 RC.
• Works with 3-6s Lipo.
• BEC Output of 6V/7.4V adjustable, continuous current 6A (switch mode).
• Cooling fan powered by built in BEC.
• Programming port shared with fan port.
• Motor Limit with 4S Lipo: 3000 KV.
• Motor Limit with 6S Lipo: 2400 KV (4274 size motor).

Motor Specifications:

• LiPos: 3-6S
• No-load Current: 5.9A
• Diameter/Length: D-42mm (1.65") L=74.9mm (2.95")
• Shaft Diameter/Length: D-5mm (0.20") L=18.5mm (0.73")
• Bearing Size (mm): Front=D16*D5*T5 Rear=D13*D5*T4
• Poles: 4
• Weight (g): 417g
• Applications: 1/8th Truck, Monster Truck

Vendor: HobbyWing
Type:
Price: 84.99

The Hobbywing EZRun 3665SD G3 Sensored Brushless Motor is designed for use with 1/10 short course trucks. Featuring a rugged, waterproof design and high quality precision components for improved power and efficiency. It also features a hall sensor for precise throttle control.

Features:

• The EzRun 3665 SD G3 features an improved waterproof sensored cable interface and an upgraded sensored mode to achieve motor temperature protection and perfectly matches to the EzRun MAX10 G2 ESC.
• The high-precision Hall sensor components ensures that the rotor position output is always accurate and consistent, achieving excellent linearity and great throttle control.
• The EzRun 3665 G3 motor adopts a high-precision bearing that is waterproof in the front end of the motor. The rear end of the motor uses precision iron cover with a smaller structure to improve the capacity, and at the same time, provides a higher bearing speed while keeping resistance low. The operation is smoother and more reliable.
• Compared to the G2 motor, the motor temperature is greatly reduced under the same load conditions. The overall efficiency is 3% more effective while the maximum output power has increased by 5%
• All the materials used on the EZRUN 3665 G3 motor (Motor casing, bearings, ultra-thin silicon steel sheets, high temperature-resistance copper wire, explosion-proof rotor, high-tolerance alloy shaft) are carefully selected and approved by our in-house engineers. Hobbywing is serious in providing users with an extraordinary performance for a long period of time.
• The motor uses a modular detachable structure design for easy disassembly and daily maintenance. This helps to prolong the lifespan of the motor and maintains the efficiency of the motor over time.

Specifications:

• Kv: 4000
• Input Voltage: 2-3S
• No-load Current: 8.2A
• Pole: 4
• Weight: 297.2g
• Bearing Size: Front: 5x5x16mm / Rear: 5x5x11mm
• Motor Diameter: 37mm
• Motor Length: 65.8mm

Includes:

• (1) EZRun 3665SD G3 Sensored Brushless Motor (4000kV)
• (1) Sensor Cable

Vendor: HobbyWing
Type: Programmer
Price: 39.99

Wireless Program Box Overview:

Hobbywing Multifunction LCD Program Box Pro G3! Serves as a program card and a battery voltage checker at the same time, this optional HW Multifunction LCD Program Box Pro G3 is the ultimate tuning tool and a must have addition to your hobbywing fleet of (ESC) electronic speed controllers! Features a Built-in large 2.8" LCD screen to display, set, and share ESC parameters, a built-in Bluetooth module for a clean wireless connection, and a user-friendly and easy-to-navigate menu, this program box is intended for drivers with Hobbywing ESCs as a do it all multifunctional device!

• A Separate battery is needed for powering this program box when ESC has no built-in/external BEC
• The USB-C Software works for PC users only.

Features:

• Built-in large 2.8" LCD screen to display, set, and share ESC parameters!
• Built-in Bluetooth module
• 1-8S LiPo Battery voltage tester
• Import, export and save profiles with quickness and ease
• Compatible with HW Link V2 App
• Supports multiple languages
• User friendly and easy to navigate

Specifications:

• Screen: 2.8" LCD
• Input voltage: DC (5-12.6V)
• Dimensions (LxWxH): 105.6x59x24.4mm
• Weight: 85g

Includes:

• (1) Multifunction LCD program box PRO (G3)

Vendor: HobbyWing
Type: Surface ESC & Motor Combo
Price: 172.99

his is the Hobbywing EZRun MAX10 G2 140 Amp Sensored Brushless Waterproof ESC/3665SD Motor Combo. Using IP67 waterproofing and featuring a smart sensored brushless system this versatile combo is an excellent choice for 1/10th 4X4 Trucks and Monster Trucks.    

Features:

• The EzRun Max10 G2 ESC features an improved waterproof sensored cable interface and an upgraded sensored mode to achieve a great sense of control feel and perfectly matches the EzRun 3665 SD G3 motors.
• Supports Turbo timing adjustment of up to 32 degrees, and in combination with the EzRun 3665 G3, the maximum speed is 25% more with greater effect.
• The smart start-stop technology is introduced to the Max10 G2 ESC. The frameless fan will not be enabled to reduced noise and saving power. The fan will only work when the temperature rises to a certain level.
• Compared with the previous generation of the MAX10 ESC, the total capacitance of the capacitor is increased by 74% and is overheating protected. The functions improve the power delivery from the battery to the ESC to avoid it from overloading and causing capacitors to explode.
• Smart freewheeling technology enables the MAX10 G2 to have higher drive efficiency than the previous generation, resulting in lower operating temperatures and a minimum temperature of approximately 25°C lower than the previous generation.
• After connecting the ESC with the OTA Wireless module, you can view the data (throttle amount, voltage, current, temperature, speed and etc) in real time through the mobile app to know the running status; The history of the running status can also be viewed by data logging.

Specifications:

• ESC:
• Continuous Current: 140A
• Burst Current: 880A
• Battery: 2-4S Lipo
• Built-in BEC: 6V/7.4V @ 5A(Switch-mode)
• ESC Programming: Independent programming port
• Motor Supported: Sensor and sensorless brushless motor
• Motor Limit:
• 3S Lipo: Kv <4000 3665 size motor
• 4S LiPo: Kv <2600 4268 size motor
• Application: 1/10 4X4 Short Course, Truck, Monster Truck
• Cooling Fan: Powered by BEC
• Size: 53x39.5x37.2mm (LxWxH)
• Weight: 120g (Including weight of wire)
• Motor:
• LiPo: 2-3S
• Motor Kv: 4000
• No-load Current: 8.2A
• Diameter: 37mm
• Length: 65.8mm
• Shaft Diameter: 5mm
• Shaft Length: 16.5mm
• Pole: 4
• Weight (g): 304.5

Includes:

• (1) EZRun MAX10 G2 140 Amp Sensored Brushless Waterproof ESC with XT60 Plug
• (1) EZRun 3665SD G3 Sensored Brushless Motor
• Sensor Cable

Vendor: HobbyWing
Type: Surface ESC
Price: 21.99

Features:

• Extreme performance
• Small in size, with a built-in capacitor module
• Great current endurance capability
• Parameters are easily set with ESC jumpers
• Easy-to-use automatic throttle range calibration
• Great built-in BEC output capacity
• Built-in capacitor
• IP-67 waterproof Rating

Specifications:

• Scale: 1/10
• Brushed/Brushless: Brushed
• Sensored/Sensorless: Sensorless
• Waterproof: IP-67
• Current:
• Continuous: 30A
• Peak: 180 A
• Input Voltage: 2-3S LiPo
• BEC Output:5V @ 2 A
• Output Connectors: 4mm Bullets
• Battery Connector: T-Style
• Dimensions: 1.39x1.26x0.70" (35.5x32.18x18mm)
• Weight: 1.37oz (39g)

Includes

• (1) Quicrun 1060 Brushed ESC

Vendor: HobbyWing
Type: ESC & Motors Combo
Price: 149.99

Vendor: HobbyWing
Type: Motor Parts
Price: 19.99

The HobbyWing XeRun Series 1/8 Motor Ball Bearing Set is crafted with top-quality materials from Germany, ensuring a very long lifespan. These bearings are specifically designed for high-speed Xerun and Ezrun brushless motors, with both front and rear bearings included in the package. With an outer diameter of 16mm at the front and 13mm at the rear, and an inside diameter of 5mm, these bearings provide a reliable and smooth performance for your motor.

Suitable Motors:
Ezrun 3656
Xerun SD 4268 (1600KV,1900KV,2200KV,2600KV)
Xerun SD 4274 (2250KV)

Features:

Specifications:

Vendor: HobbyWing
Type: Surface ESC
Price: 38.99

Vendor: HobbyWing
Type: Surface ESC
Price: 21.99

Features:

Specifications:

Vendor: HobbyWing
Type: ESC & Motors Combo
Price: 284.99

Xerun XR8 Pro G3 Sensored Brushless Combo

The Xerun XR8 Pro G3 Brushless ESC and motor combo is Loaded with cutting-edge technologies and features, this 1/8 competition combo is designed to provide a higher level of performance and reliability for all competitive racers looking for the ultimate smooth control and supreme power you'd come to expect from Hobbywing! For added protection, this ESC (Electric Speed Control) is equipped with advanced thermal protection and reverse polarity protection. These advancements allow for an ESC that is designed to outperform the competition.

Features:

• XR8 Pro G3
• Smart freewheeling technology enables the ESC to have higher drive efficiency and lower operating temperature
• Compared with the XR8 Pro G2, the maximum temperature is reduced by approximately 59F
• Dual brake mode
• Advanced Turbo and Boost timing technology
• Built-in reverse polarity protection circuit
• Real-time data recording function, easy to obtain power running status
• Capacitor thermal protection is designed and implemented into the ESC and will effectively prevent capacitors from exploding and causing irreversible damage to the ESC due to overload
• Superior dustproof protection
• Custom ultra-soft 11AWG silicone wire
• Frameless fan blade is designed with specially formulated material to reduce the defective rate of the fan caused by impact from small stones, sand, and other foreign objects
• Intelligent fan with noise reduction and power saving functions
• 4268SD G3 Motor
• 2200Kv recommended for 1/8 off road
• Turbo Timing Technology
• Full Sensored mode (when paired with XR8 ESC)
• Adjustable Timing (Bi-Directional)
• Advanced Hall Sensor System
• 4-pole-8-magnet "Staggered Pole" rotor - HOBBYWING Patented design
• Guarantees users effective heat dissipation and dust prevention
• Double insulated windings (240°C R-rated)
• Outstanding performance and super durability

Specifications:

• ESC:
• Scale: 1/8
• Type: Brushless Sensored
• Input Voltage: 2-4S LiPo
• BEC Output: 6V/7.4V Adjustable
• Continuous: 200A
• Peak: 1080A
• Motor Limit: 3S Lipo: KV= 4000 3660 Size motor / 4S Lipo: KV= 3000 4268 Size motor
• Braking mode: FOC/BLDC
• Programmable: Yes, Via OTA Programmer or LCD G2 Program Box
• Suitable applications: 1/8 Off-road, On-road Racing & 1/10th Short course & Monster truck
• Size(LxWxH): 54.8x38.8x36.8mm
• Weight: 102.8g
• Motor:
• KV: 2200KV
• Pole: 4
• LiPo: 2S-6S
• Resistance: 0.0069
• Shaft Diameter: 5mm
• No Load Current: 4.1A
• Size (Diameter x Length): 42x68mm
• Weight:  285g
• Application: 1/8 Off Road

Includes:

Vendor: HobbyWing
Type:
Price: 129.99

Vendor: HobbyWing
Type:
Price: 79.99

Vendor: HobbyWing
Type:
Price: 89.99

This is the Hobbywing EZRun MAX10 SCT V3 1/10 Scale Waterproof Brushless ESC. Compatible with 3-4S LiPo power, the MAX10 SCT provides the ultimate power upgrade solution for many popular 1/10 scale vehicles. 

Features:  

• High Reliability & Durability: Built with the most rugged and high-quality components and coupled with cutting-edge firmware, the EZRun MAX10 SCT is able to deliver unmatched power and performance for even the most hardcore of racing applications, but is also responsive enough to protect itself from damage due to overloading due to physical abuse, overuse or even human error.
• Great Flexibility & Versatility: With incredible acceleration capabilities and a rock-solid, stable output, the MAX10 SCT can handle instant full-torque start-ups for wheelies, high-speed racing on straightaways and powering through the bumpiest terrain. The user will have the choice of adjusting the ESC parameters as per his preference and ability.
• Applicable for All Weather Conditions: The waterproof and dust-proof design allows the MAX10 SCT to be used in all weather conditions without any issue of damage caused to the ESC from water or dust.
• High Voltage Built-in BEC: The MAX10 SCT has adopted the world's first HV built-in BEC with an output current of up to 3 Amps and a switchable output voltage of 6-7.4V. The high voltage BEC is designed to handle today's high voltage servos on demand used by 1/10 scale vehicles.
• Advanced & Secure Electronic Switch: The MAX10 SCT features an electronic switch with a lifespan of over 50,000 on/off cycles, housed in a completely waterproof, dust-proof and shock-resistant design.
• Regular Firmware Updates Free of Charge: You can upgrade the MAX10 SCT with the Hobbywing USB LINK software, a multifunction LCD program box and a laptop. Hobbywing updates it's ESC firmware regularly giving you upgraded features more often when available.
• Maintenance Free: The ESC, minus the cooling fan, is basically maintenance free. The cooling fan is designed to be shockproof, which in turn will reduce damage brought on by frequent vehicle big jumps and landings on hard surfaces.

Specifications: 

• Continuous Current: 120A
• Peak Current: 760A
• Motor Type: Sensorless Brushless Motor
• Applications: 1/10th Short Course Trucks, Stadium Trucks, Monster Trucks
• Motor Limit:
• 2S LiPo: KV ≤6000
• 3S LiPo: KV ≤4000
• 4S LiPo: KV ≤3000
• LiPo/NiMH Cells: 9-12S NiMH, 3-4S LiPo
• BEC Output: 6V/7.4V Switchable, Continuous Current of 3A (Switch-mode BEC)
• Cooling Fan: Powered by the stable BEC voltage of 5V/7.4V
• Connectors: Input End: None, Output End: Female 4.0mm Gold Connectors (pre-soldered onto the PCB of the speed controller)
• Size (LxWxH): 49.0x39.5x34.7mm
• Weight: 105g
• Programming Port: FAN/PRG Port

Includes:

• (1) MAX10 SCT ESC
• (3) 12 AWG, 200C Black wires for a brushless motor
• (1) 12 AWG, 200C Red & Black wires for battery input 
• (1) Double side tape
• (2) Heat shrink tube
• (1) Manual

Recommended Hobbywing Programmers:

• HWA30502000014: Hobbywing Multifunction LCD Program Box
• HWA86020010: Hobbywing Program Box

Vendor: HobbyWing
Type:
Price: 94.99

This is the Hobbywing 2200kV EZRun 4274 Sensorless Brushless Motor. This powerful motor is compatible with 2-6S LiPo batteries and can provide a great upgrade for all popular 1/8 scale electric monster trucks such as the Traxxas Revo, E-Maxx, HPI Savage and Thunder Tiger E-Mat, plus many other trucks and buggies.

High Torque
The 4-pole design will guarantee the motor to produce very large amounts of torque, a much faster acceleration response and a very stable output of power to the drivetrain.

High Efficiency
Hobbywing's temperature control technology has been designed to protect the motor from being damaged by heat thus less heat more efficient the motor will run and perform. The output performance of this motor has an effieciency rate of up to 90% meaning that if the nergy consumption of the motor is at 1000 watts your guaranteed that 900 watts of that power will be available and no less.

Great Construction
The motor housing is made from hard anodized aluminum, motor windings are wound from pure oxygen-free double insulated copper wire and the advanced rotor structure is designed to handle high temperature from the use of rare earth magnets. The output shaft is made from high quality polished alloy steel and the imported bearings are high precision metal caged from a minimum to zero friction which in turn will guarantee strength, outstanding performance, high durability and smoothness of the motor.

Compatible with the EZRun MAX8 ESC
When pairing the EZRun 4274 motor with the Hobbywing EZRun MAX8 (150A) ESC, the excellent match between ESC and motor will give you large torque plus a very smooth and linear power band.

Specifications:
KV (No-load): 2200
R. (Ω): 0.0058
Current No-load（A）: 5
Max. Output Power（W）: 3000
C.at the point of M.O.P *（A）: 120
Motor Diameter x Length （mm）: 42x74
Shaft Diameter x Length （mm）: 5x18.5
LiPo (S): 2-6
W (g): 418g
Application: 1/8th Monster Truck / Truck
Sensored: No

Vendor: HobbyWing
Type:
Price: 79.99

This is the Hobbywing XERUN SCT 3652SD G2 Sensored Brushless Motor. This 4-pole power house is great for light-duty short course, truck and monster truck sensored applications.

Note: Because this motor features a 5mm diameter motor shaft, it requires pinion gears with a 5mm bore.  

Features: 

• Innovative 4-pole-8-magnet "staggered pole" rotor (Hobbywing-patented) with low cogging effect and torque pulsation greatly improves control feel around corners.
• Built-in chip for making the motor be easily identified by HOBBYWING ESCs. When pairing it with a HW 1/8th sensored ESC (i.e. XR8 SCT/Plus), the motor can work in the “sensored” mode at all times with gr eat output linearity after the identification. The Turbo timing is allowed to be activated for higher output.
• Magnetic ring mounted on the rotor protects the motor from signal interference and guarantees its super stability in the “sensor ed” mode.
• With the mechanical timing adjustable from 20 degrees to 40 degrees, users are able to have different output power.
• Turbine design implemented by the rotor accelerates the internal air circulation and reduces heat.
• Rebuild-able design (partially rebuild-able) and screw-less motor case for easy routine maintenance effectively prolong the motor life and raise the motor effficiency.
• CNC machined aluminum housing, high purity copper windings, advanced rotor structure, high-quality alloy steel output shaft, high-precision bearings for high durability and smoothness.
• Updated “U” solder tabs at the bottom of the motor for easy soldering and wiring.

Specifications: 
kV (no load): 4300 
LiPo: 2S 
Resistance: 0.0052 
No-load Current: 4.2A 
Motor Diameter: 36mm (1.417in) 
Motor Length: 52.5mm (2.067in) 
Shaft Diameter: 5mm (0.197in) 
Shaft Length: 15mm (0.591in) 
Poles: 4 
Weight: 187g (6.60oz) 
Applications: 1/10 light duty SCT, truck, monster truck 

Vendor: HobbyWing
Type:
Price: 189.99

The Hobbywing Xerun XR8 SCT Brushless ESC and 3652SD G2 Motor Combo is a great choice for light weight short course trucks, monster trucks, and other light duty 2S LiPo applications.

The XR8 SCT is the first 1/8 scale competition ESC which can work the full-sensored mode at all times when paired with a Hobbywing matching motor. Perfect for 1/10 4WD Short Course Truck, Monster Trucks and of course 1/8th scale, the XR8 SCT ESC boasts full sensored operation, 140A output, electronic switch, 6V/7.4V switchable BEC and wireless programming capabilities.  

The Hobbywing XERUN SCT 3652SD G2 Sensored 5100kV Brushless Motor is a 4-pole power house, great for light-duty short course, truck and monster truck sensored applications. Because this motor uses a 5mm diameter motor shaft, it requires pinion gears with a 5mm bore.

Features:  

• ESC
• Turbo Timing Technology: Turbo timing technology is implemented by the XR8 SCT to unleash the maximum power of a HOBBYWING matching motor.
• Small & Light Structure Design: Small (30.1% smaller than XR8 Plus in size) and light (36.5g lighter than XR8 Plus in weight) structure design greatly simplifies the installation of the power system (esp. for vehicles like buggy and touring car with compact chassis).
• Programming / Upgrading / Data reading wirelessly: With Hobbywing's "WiFi Express" module and iPhone or an Android phone (with the HOBBYWING WiFi Link software installed), the user can remotely program parameters, upgrade firmware and check relevant data of the ESC without leaving the control stand. 
  *WiFi Module not included and sold separately:  
• Coasting: The XR8 SCT provides an exceptionally smooth off-throttle coasting function, which simulates the feeling of inertia and momentum of a large-scale car driving experience. This can greatly improve the performance of builds utilizing large, high-powered motors as electromagnetic drag becomes a substantial factor in sudden deceleration when in the off-throttle position, adversely affecting driving performance and overall maneuvering.
• Capacitor Thermal Protection: Capacitor thermal protection implemented by the XR8 SCT will effectively prevent capacitors from exploding and causing irreversible damage to the ESC due to overload.
• High Voltage Built-in BEC: High voltage built-in BEC with an output current of up to 15 Amp and a switchable output voltage of 6V-7.4V allows users to use various high torque and high voltage servos.
• High Reliability & Durability: Built with the most rugged and high-quality components and coupled with cutting-edge firmware, the XR8 SCT is able to deliver unmatched power and performance for even the most hardcore of racing applications, but is also responsive enough to protect itself from damage due to overloading due to physical abuse, overuse or even human error.
• Advanced and Secure Electronic Switch: Electronic switch with a lifespan of over 50000 on/off cycles, housed in a completely waterproof, dust-proof and shock-resistant design.
• Ultra-Reliable Cooling System: HOBBYWING's patented cooling technology utilizes proprietary heat-conductive copper bars to rapidly and effectively transfer all internal heat from the MOSFET board to the integrated CNC machined billet aluminum heatsink housing. The cooling fan adopts a shockproof mounting which effectively reduces the possibility of fan damage due to vehicle’s frequent jumps.
• Wide applicability: This XR8 SCT ESC is not only applicable to 1/8th buggies and short-course trucks but also 1/10th short-course trucks, trucks and monster trucks.
• Motor
• Innovative 4-pole-8-magnet "staggered pole" rotor (Hobbywing-patented) with low cogging effect and torque pulsation greatly improves control feel around corners.
• Built-in chip for making the motor be easily identified by HOBBYWING ESCs. When pairing it with a HW 1/8th sensored ESC (i.e. XR8 SCT/Plus), the motor can work in the “sensored” mode at all times with great output linearity after the identification. The Turbo timing is allowed to be activated for higher output.
• Magnetic ring mounted on the rotor protects the motor from signal interference and guarantees its super stability in the “sensor ed” mode.
• With the mechanical timing adjustable from 20 degrees to 40 degrees, users are able to have different output power.
• Turbine design implemented by the rotor accelerates the internal air circulation and reduces heat.
• Rebuild-able design (partially rebuild-able) and screw-less motor case for easy routine maintenance effectively prolong the motor life and raise the motor effficiency.
• CNC machined aluminum housing, high purity copper windings, advanced rotor structure, high-quality alloy steel output shaft, high-precision bearings for high durability and smoothness.
• Updated “U” solder tabs at the bottom of the motor for easy soldering and wiring.

Specifications: 

• ESC
• Scale: 1/8th 1/10th
• Brushed/Brushless: Brushless 
• Sensored/Sensorless: Sensored
• Waterproof: No
• Cont./Peak Current: 140A/880A
• Input: 2-4S Lipo/6-12 Cell NiMH
• BEC Output: Switch Mode:6V/7.4V,6A
• Input Wires: Red-12AWG-200mm*1/Black--12AWG-200mm*1
• Output Wires: Blue -12AWG-200mm*1; Yellow-12AWG-200mm*1; Orange -12AWG-200mm*1
• Input Connectors: No
• Output Connectors: No
• Fan Size: 30x30x10mm
• Fan Voltage Range: 5-7.4V
• Fan Powered by: Powered by BEC
• ESC Programing via LCD Program Box: Supported
• ESC Programing via WiFi Module: Supported *WiFi Module not included
• Program Port: FAN/Program Port
• Firmware Upgrade: Supported
• Size: 54.1x37.2x36.1mm
• Weight: 90.5g
• Motors: Sensored & Sensorless Brushless Motors
• Vehicles: 1/10th SCT/Truck/Monster Truck & 1/8th Buggy/On-road Racing
• Motor
• kV (no load): 5100
• LiPo: 2S
• Resistance: 4.7
• No-load Current: 3.5A
• Motor Diameter: 36mm (1.417in)
• Motor Length: 52.5mm (2.067in)
• Shaft Diameter: 5mm (0.197in)
• Shaft Length: 15mm (0.591in)
• Poles: 4 
  
• Weight: 192g (6.60oz) 
  
• Applications: 1/10 light duty SCT, truck, monster truck 

Vendor: HobbyWing
Type:
Price: 189.99

The Hobbywing Xerun XR8 SCT Brushless ESC and 3652SD G2 Motor Combo is a great choice for light weight short course trucks, monster trucks, and other light duty 2S LiPo applications.

The XR8 SCT is the first 1/8 scale competition ESC which can work the full-sensored mode at all times when paired with a Hobbywing matching motor. Perfect for 1/10 4WD Short Course Truck, Monster Trucks and of course 1/8th scale, the XR8 SCT ESC boasts full sensored operation, 140A output, electronic switch, 6V/7.4V switchable BEC and wireless programming capabilities.  

The Hobbywing XERUN SCT 3652SD G2 Sensored 6100kV Brushless Motor is a 4-pole power house, great for light-duty short course, truck and monster truck sensored applications. Because this motor uses a 5mm diameter motor shaft, it requires pinion gears with a 5mm bore.

Features:  

• ESC
• Turbo Timing Technology: Turbo timing technology is implemented by the XR8 SCT to unleash the maximum power of a HOBBYWING matching motor.
• Small & Light Structure Design: Small (30.1% smaller than XR8 Plus in size) and light (36.5g lighter than XR8 Plus in weight) structure design greatly simplifies the installation of the power system (esp. for vehicles like buggy and touring car with compact chassis).
• Programming / Upgrading / Data reading wirelessly: With Hobbywing's "WiFi Express" module and iPhone or an Android phone (with the HOBBYWING WiFi Link software installed), the user can remotely program parameters, upgrade firmware and check relevant data of the ESC without leaving the control stand. 
  *WiFi Module not included and sold separately 
• Coasting: The XR8 SCT provides an exceptionally smooth off-throttle coasting function, which simulates the feeling of inertia and momentum of a large-scale car driving experience. This can greatly improve the performance of builds utilizing large, high-powered motors as electromagnetic drag becomes a substantial factor in sudden deceleration when in the off-throttle position, adversely affecting driving performance and overall maneuvering.
• Capacitor Thermal Protection: Capacitor thermal protection implemented by the XR8 SCT will effectively prevent capacitors from exploding and causing irreversible damage to the ESC due to overload.
• High Voltage Built-in BEC: High voltage built-in BEC with an output current of up to 15 Amp and a switchable output voltage of 6V-7.4V allows users to use various high torque and high voltage servos.
• High Reliability & Durability: Built with the most rugged and high-quality components and coupled with cutting-edge firmware, the XR8 SCT is able to deliver unmatched power and performance for even the most hardcore of racing applications, but is also responsive enough to protect itself from damage due to overloading due to physical abuse, overuse or even human error.
• Advanced and Secure Electronic Switch: Electronic switch with a lifespan of over 50000 on/off cycles, housed in a completely waterproof, dust-proof and shock-resistant design.
• Ultra-Reliable Cooling System: HOBBYWING's patented cooling technology utilizes proprietary heat-conductive copper bars to rapidly and effectively transfer all internal heat from the MOSFET board to the integrated CNC machined billet aluminum heatsink housing. The cooling fan adopts a shockproof mounting which effectively reduces the possibility of fan damage due to vehicle’s frequent jumps.
• Wide applicability: This XR8 SCT ESC is not only applicable to 1/8th buggies and short-course trucks but also 1/10th short-course trucks, trucks and monster trucks.
• Motor
• Innovative 4-pole-8-magnet "staggered pole" rotor (Hobbywing-patented) with low cogging effect and torque pulsation greatly improves control feel around corners.
• Built-in chip for making the motor be easily identified by HOBBYWING ESCs. When pairing it with a HW 1/8th sensored ESC (i.e. XR8 SCT/Plus), the motor can work in the “sensored” mode at all times with great output linearity after the identification. The Turbo timing is allowed to be activated for higher output.
• Magnetic ring mounted on the rotor protects the motor from signal interference and guarantees its super stability in the “sensor ed” mode.
• With the mechanical timing adjustable from 20 degrees to 40 degrees, users are able to have different output power.
• Turbine design implemented by the rotor accelerates the internal air circulation and reduces heat.
• Rebuild-able design (partially rebuild-able) and screw-less motor case for easy routine maintenance effectively prolong the motor life and raise the motor effficiency.
• CNC machined aluminum housing, high purity copper windings, advanced rotor structure, high-quality alloy steel output shaft, high-precision bearings for high durability and smoothness.
• Updated “U” solder tabs at the bottom of the motor for easy soldering and wiring.

Specifications: 

• ESC
• Scale: 1/8th 1/10th
• Brushed/Brushless: Brushless 
• Sensored/Sensorless: Sensored
• Waterproof: No
• Cont./Peak Current: 140A/880A
• Input: 2-4S Lipo/6-12 Cell NiMH
• BEC Output: Switch Mode:6V/7.4V,6A
• Input Wires: Red-12AWG-200mm*1/Black--12AWG-200mm*1
• Output Wires: Blue -12AWG-200mm*1; Yellow-12AWG-200mm*1; Orange -12AWG-200mm*1
• Input Connectors: No
• Output Connectors: No
• Fan Size: 30x30x10mm
• Fan Voltage Range: 5-7.4V
• Fan Powered by: Powered by BEC
• ESC Programing via LCD Program Box: Supported
• ESC Programing via WiFi Module: Supported *WiFi Module not included and sold separately
• Program Port: FAN/Program Port
• Firmware Upgrade: Supported
• Size: 54.1x37.2x36.1mm
• Weight: 90.5g
• Motors: Sensored & Sensorless Brushless Motors
• Vehicles: 1/10th SCT/Truck/Monster Truck & 1/8th Buggy/On-road Racing
• Motor
• kV (no load): 6100
• LiPo: 2S
• Resistance: 2.9
• No-load Current: 5.9A
• Motor Diameter: 36mm (1.417in)
• Motor Length: 52.5mm (2.067in)
• Shaft Diameter: 5mm (0.197in)
• Shaft Length: 15mm (0.591in)
• Poles: 4 
• Weight: 186g (6.56oz) 
• Applications: 1/10 light duty SCT, truck, monster truck 

Vendor: HobbyWing
Type:
Price: 139.99

This is the Hobbywing 4274SD G2 Sensored Brushless Motor from Hobbywing, suited for us with most 1/8 Off-Road Buggy and Truggy options. 

Full-Sensored Mode 
The first motor (in the world) with a built-in chip which helps the ESC identify it's a Hobbywing motor (when pairing with XERUN XR8/XR8 Plus) and form a power system which can work in the "Full-Sensored" mode to provide users with improved performance and smoother control. 

Note: this motor is also applicable to other ESCs, but it cannot work in the Sensored mode at all times. 

Turbo Timing Technology 
When pairing this motor with HW XERUN XR8 series of ESCs, the Turbo Timing, which is widely adopted in 1/10th scale on-road racing, can be enabled and unleash the utmost power of the motor.

Bi-Directional Adjustable Timing 
The bi-directional adjustable mechanical timing, can meet the different power demands of various applications. Bi-Direction refers to CW and CCW operation of the motor. 

Advanced Hall Sensing System 
The first "error-free" Hall sensing system adopted by this motor guarantees users the steady operation in the "Full-Sensored" mode. A separate high-speed high precision encoder always output the clean signals (indicate the rotor) and not be affected by other signal interference.

Low Cogging Torque 
The first motor adopted the innovative 4-pole 8-magnet "staggered pole" rotor has extremely low cogging effect and low torque pulsation (it's reduced by 85% when comparing with traditional 1/8th scale motors). 

Features: 

• CNC-machined aluminum ribbed heatsink case with the sensor port covered by silicon O-ring seal guarantees users the effective heat dissipation and dust prevention
• 4 M3 mounting holes and 2 M4 mounting holes on the front case are applicable to various motor mounts
• New-style U gold-plated tabs with extremely-low internal resistance allows users to solder output wires easily and firmly on
• The use of double insulated windings (240°C R-rated), NMB bearings from Japan, and the high-intensity adhesive (340°C) guarantees users the outstanding performance and super durability

Specifications: 
KV (No-load): 2250 
Current No-load（A）: 5.4 
Motor Diameter x Length （mm）: 42x68 
Shaft Diameter x Length （mm）: 5x18.5 
LiPo (S): 2-6 
W (g): 396g 
Application: 1/8th Monster Truck, Short Course Truck, Buggy, & Truggy 
Sensored: Yes