Vendor: Progressive RC
Type: Charge Adapter
Price:
4.99
This compact converter is the next best thing to replacing the connector on your battery. Minimal resistance and a tiny footprint ensure that you'll barely notice having the adapter in place. Use the option selection to select the proper adapter for your application
Vendor: Tuning Haus
Type: Lipo Bag
Price:
10.99
Vendor: Bat-Safe
Type: Lipo Bag
Price:
79.99
The Bat-Safe LiPo Charging Case is a simple and effective solution for charging and storing LiPo batteries. If you have an R/C model, chances are you own at least one lithium battery. Lithium batteries are an integral component to surface and air models. In rare instances, lithium batteries can become hazardous and catch fire - destroying your personal items, your home and maybe even the life of you or a loved one.
Thats why Bat-Safe was developed. Bat-Safe is an insulated and vented, steel, double wall steel box that contains the fire and intense heat in the event of a battery fire. The smoke and soot is filtered through a built in flame smothering filtration system to protect the area from odor and a majority of the smoke damage that can occur from a battery fire. Plus, Bat-Safe is light weight, easy to use and most importantly, inexpensive! The Bat-Safe is cheap insurance for anyone who uses lithium batteries of any size.
Other features include the ability to charge and store up to two 6S 5000mAh (222Wh) LiPo batteries safely, a charger stand to help keep your charging station organized and tidy, a handle for easy transportation, a fire proof lid seal, a wire through port that provides an access point for charging wires. All of these features combined make Bat-Safe the most advanced battery charging accessory that creates a safer charging environment than anything else currently available.
In order to utilize the Bat-Safe to it's full advantage, Bat-Safe recommends using balance cable extensions (sold separately) that can connect to the charger on the outside, while charging the battery inside the Bat-Safe box.
Specifications:
Charge Space: 9.5x6.5x4"
Outer Dimensions: 12x9x7"
Weight: 4 pounds
Maximum Battery Capacity: 2x 6S 5000mAh (222Wh)
Vendor: Traxxas
Type: Charge Adapter
Price:
10.00
Introducing the Traxxas TRX-4M ID Battery Charger Port Adapter. This innovative adapter features the TRX-4M iD charging port and a 2-amp charging capacity, making it easy and efficient to recharge your #2821 2-cell LiPo battery with any Traxxas EZ-Peak iD charger. Say goodbye to complicated charging processes and hello to convenience and speed!
Vendor: Progressive RC
Type: Charge Adapter
Price:
3.99 - 4.99
(5 variants)
This is a Progressive RC Short 3" wired battery adapter. Package will include one adapter, 3" in total length. Available in various connectors, use the menu to choose which option you need.
Vendor: SMC
Type: Battery Checker
Price:
10.99
We are proud to introduce our Precision Lipo Alarm designed to get a more precise cutoff then an ESC. When running the Traxxas or Arrma ESC which are known to have the cutoff set to low and not adjustable this is a must have item if you are interested in getting maximum cycle life out of your packs.
With standard Lipo alarms the alarm is set at the desired cutoff but the alarm doesn’t account for voltage drop which occurs under heavy acceleration. This means the normal alarms will go off when the pack/cells haven’t reached the desired cutoff voltage. The SMC Precision Alarm has been designed to have a delay before the alarm goes off so this prevents voltage drop from heavy acceleration to trigger the alarm. The Precision Alarm will go off once the desired cutoff is reached. You can see the difference between a normal alarm and the precision alarm by clicking on the video link below.
https://www.perantinostravel.com/jZH8ZE8xYXE
As you can see in the video with the normal alarm set at 3.70V per cell the alarm goes off after a few heavy accelerations. The voltage of the cells is at 3.82V so there is still a good amount of play time left in the packs before the 3.70V cutoff is reached. We then switched to the precision alarm set at 3.70V per cell and we didn’t film the entire session but we got around 7 minutes of play time before the alarm finally went off. As you can see the cells were at 3.72V. This precision alarm is more precise then the ESCs cutoff as the voltage is measured at the cells by connecting the alarm through the balance connector. This by passes the voltage drop encountered in the power connectors and power wires.
We recommend you start with a 3.70V cutoff and see where the cells end up when the alarm goes off as the internal resistance of the cells will impact the amount of voltage drop. So packs with higher internal resistance cells may require the voltage to be lowered to 3.60V per cell.
The Precision Alarm is good for 2S to 8S packs. We sell it as a kit which has a 6S extension cable so you can mount it permanently in your vehicle where there is room. We also include 2 pieces of Velcro so you can mount the alarm either on the pack like the picture below or in the vehicle using the extension cable. We recommend to use the fuzzy side of the Velcro on the back of the alarm.
To set the cutoff on the alarm you must connect it using the proper polarity so the outside black wire on the balance connector must be connected towards the left when the alarm is facing you. You can see this in the picture below. To adjust the cutoff press the button on the end of the alarm until you reach the desired cutoff which we recommend to start at 3.70V. Please note the precision of the cell voltage readings on this alarm can be off by a few hundredths of a volt so it’s not recommended to use this alarm to check the precision of how well your charger charged the cells or if the cells are perfectly in balance once charged.
Below is a picture of the precision alarm installed in an E-Revo with the included extension. We recommend you always put the alarm on the pack that is connected to the negative side of the ESC. We also recommend you label your packs and switch sides every use.
Vendor: Gens Ace
Type: Charge Adapter
Price:
4.99
The Gens Ace 4S XH Male to Male Battery Balancing Cable is an essential accessory for maintaining proper battery balance.
This balance adapter is a replacement intended for Gens Ace 4S batteries with a built-in balance port on the battery. Package includes one balance adapter.
Vendor: Racers Edge
Type: Lipo Bag
Price:
8.99 - 17.99
(3 variants)
Safely and conveniently store, transport, and charge a wide range of LiPo packs with Racer's Edge new safety sack. Constructed from durable and flame resistant ballistic material with heavy-duty stitching and aggressive hook & loop closures.
Large: 330mm x 220mm
Easily holds up to five 6S packs.
Medium 230mm x 180mm
Easily holds up to three 6S packs.
Small 150mm x 110mm:
Easily holds smaller 1S-3S LiPo packs
Briefcase 240mm x 180 x 65mm
Easily holds up to five 6S packs.
Vendor: Progressive RC
Type: Charge Adapter
Price:
11.99
Easily charge your battery with this flexible cable that converts a single TRX ID connector to an XT60 main lead and JST-XH balance lead. Available in 2S, 3S, or 4S sizes, it's a must-have for standard LiPo chargers.
| Input Connector | Male XT60 (male housing, female bullets) & male JST-XH (male housing, female pins) |
| Output Connector | TRX ID |
| Current Rating | 35A |
| Wire Gauge | 16 AWG |
| Length | 12" |
Vendor: Gens Ace
Type: Charge Adapter
Price:
4.99
This Gens Ace XT60 male to EC5 female adapter cable is a reliable, durable solution for your battery connection needs. It features a heat-resistant design that ensures safe, prolonged use. With a secure connection and impact resistance, you can depend on these cables for efficient power transfer.
Vendor: Traxxas
Type: Charge Adapter
Price:
7.00
Vendor: Spektrum
Type: Charge Adapter
Price:
19.99
Pro Series Race 4s Charge Cable: IC3/5mm
Vendor: SMC
Type: Charge Adapter
Price:
3.99
This is a 4mm to Traxxas adapter that can be used on chargers that use a 4mm female connector to connect the power leads.
Vendor: Gens Ace
Type: Charge Adapter
Price:
3.99
Vendor: SMC
Type: Charge Adapter
Price:
3.99
Vendor: Progressive RC
Type: Charge Adapter
Price:
4.99
Our cables are constructed from the highest quality materials to ensure that you get the best connection possible every time.
These extension leads give you an extra 12" of leeway for your balance connection - or 24" if you chain both cables together - allowing you to charge in whatever situation you find yourself in.
Specifications:
Vendor: Progressive RC
Type: Battery Checker
Price:
16.99
Vendor: Dynamite
Type: Charge Adapter
Price:
12.99
Vendor: Racers Edge
Type: Lipo Bag
Price:
11.99
This is a LiPo safety bag from Racers Edge. Give yourself a safe and convenient way to store, transport, and charge up to five 6S LiPo battery packs with this practical LiPo bag. Made using durable and flame resistant ballistic fiber material with durable stitching and a secure Velcro closure.
Vendor: Dynamite
Type: Charge Adapter
Price:
4.99
Vendor: Spektrum
Type: Charge Adapter
Price:
19.99
Vendor: Spektrum
Type: Charge Adapter
Price:
11.99
Spektrum RC Charge Lead Adapter. This adapter is a great option to allow you to charge a battery with a JST-PH connector with a Spektrum RC Smart Charger. The adapter features a female IC3 connector to a male JST-PH connector and uses a standard JST-XH connector for balancing. Package includes one charge lead adapter.
Old SKU: EFLA700UM
Vendor: LRP
Type: Charge Adapter
Price:
7.99
This is an LRP Universal Charging Lead, with 4mm male bullet plugs and a Tamiya connector. This 50cm length lead is a great choice for any charger that uses 4mm bullet output's, and nickel batteries with a Tamiya connector.
Features:
Vendor: SMC
Type: Charge Adapter
Price:
4.99
SMC EC3 to Traxxas Charge Adapter
ic3 to traxxas
traxxas to ic3
ic3
Vendor: Maclan Racing
Type: Charge Adapter
Price:
29.99